德國p+f接口模塊，倍加福接口模塊詳細參數
如果您對該產品感興趣的話,可以
產品名稱: 德國p+f接口模塊，倍加福接口模塊詳細參數
產品型號: AVM58N-011K1R0GN-1213
產品展商: PEPPERL+FUCHS
產品文檔: 無相關文檔
簡單介紹
德國p+f接口模塊，倍加福接口模塊詳細參數
盡管較多的模塊安裝在一個機柜中，但熱耗散極低。
Switch isolators supply power to the proximity sensor in a hazardous area,
receive a proportional current,
德國p+f接口模塊，倍加福接口模塊詳細參數
德國p+f接口模塊，倍加福接口模塊詳細參數
的詳細介紹
德國p+f接口模塊，倍加福接口模塊詳細參數
H系列接口模塊可以很容易的插接在端子板上，
無需任何輔助工具和電纜接線。模塊的本安現場信號與安全區非本安測之間電氣隔離。
This means the residual voltage in normal operation is
approximately 8 VDC and the short circuit current is approximately 8 mA.
The switch points are typically between 1.2-2.1 mA.
Many Pepperl+Fuchs isolators offer optional lead breakage and short
circuit monitoring (activated by slide switches) for the hazardous area circuit.
These isolators feature three outputs that can be reversed using the mode of
operation switch: relay, active transistor and passive transistor outputs.
H系列接口模塊的主要特性是通道密集度*，節省空間，單回路集成和開車調試簡便。
HID模塊寬度為18mm，主要特點是通道密集度*，
低功耗設計，SIL2/3等級。16槽位的端子板多可連接64通道。
convert input signals to digital output signals and
transfer switching signals to a control device such as DCS or PLC.
The switch isolator consists of three primary components: the power supply,
the transistor switch amplifier and the output stage.
Galvanic isolation separates the input, output and power supply circuits.
The isolator input stage is designed in accordance with DIN EN60947 (NAMUR).
單通道HIC接口模塊寬度僅位12.5mm，主要特點是單回路集成，SIL2/3等級，
節省機柜空間可達33％。低功耗設計使得柜內溫度較低，延長模塊壽命。
德國p+f接口模塊，倍加福接口模塊詳細參數
